Cone crusher
Cone crusher is suitable to crush various kinds of ores and rocks of medium or above medium hardness. Compare with jaw crusher, cone crusher is of stable structure, high efficiency, easy adjustment, economic operation, etc. The spring safety system of crusher acts as an overloading protection system that allows metal to pass through the crushing chamber so as not to damage the cone crusher. The safety system uses dry oil and water as two kinds of sealed formation to make plaster powder and engine oil separate to make sure reliable performance. The type of crushing chamber depends upon size of feeding and fineness of crushed product. The standard type (PYB) is applied to medium crushing, the medium type is applied to medium or fine crushing and the short head type is applied to fine crushing.
Working Principle of Cone Crusher:
Cone crusher crushes materials by the working surface between the movable cone and fixed cone. So it is more advanced and efficiency efficient than jaw crusher. The movable cone is supported by spherical bearing and fixed on an hanging erect shaft which is set in the eccentric sleeve, and the sleeve is set on the stopping and pushing bearing. The movable cone and erect shaft are driven by the eccentric shaft sleeve together. The eccentric shaft sleeve is driven by horizontal shaft and fimbriated gear, and the wheel of the conveyor belt is driven by motor through v-belts.
The lower part of vertical shaft is installed in the eccentric sleeve. When the eccentric sleeve rotates, there is a conical surface lined out by the shaft. When the movable cone comes near the fixed cone, rocks are grinded into pieces, when the movable cone leaves, grinded materials is discharged from the discharge hole. The fixed cone can be ascended or descended by adjusting setting to adjust the width of discharge hole, consequently the output size is determined adjusted.
Features of Cone crusher:
The lower part of vertical shaft is installed in the eccentric sleeve. When the eccentric sleeve rotates, there is a conical surface lined out by the shaft. When the movable cone comes near the fixed cone, rocks are grinded into pieces, when the movable cone leaves, grinded materials is discharged from the discharge hole. The fixed cone can be ascended or descended by adjusting setting to adjust the width of discharge hole, consequently the output size is determined adjusted.
Features of Cone crusher:
-Big crushing ratio, high efficiency while working;
-Perfect lubricating device ensures the reliable functions of machine;
-Perfect lubricating device ensures the reliable functions of machine;
-Wearing parts are of high quality, thus lowering the cost efficiently;
-Long life and wide usage.
-Long life and wide usage.
Main technical parameter:
Model
|
Diameter breaking (mm)
|
Feed opening(mm)
|
Max feed size(mm)
|
Range of discharge opening (mm)
|
Capacity(t/h)
|
Power (kw)
|
Speed of eccentric shaft
(r/min) |
Weight including motor (t)
|
Overall dimension L×W×H(mm)
|
PYB600
|
Φ600
|
75
|
65
|
12-15
|
40
|
30
|
356
|
5
|
2234×1370×1675
|
PYD600
|
Φ600
|
40
|
35
|
3-13
|
12-23
|
30
|
356
|
5.1
|
2234×1370×1675
|
PYB900
|
Φ900
|
135
|
115
|
15-50
|
50-90
|
55
|
333
|
11.2
|
2692×1640×2350
|
PYZ900
|
Φ900
|
70
|
60
|
5-20
|
20-65
|
55
|
333
|
11.2
|
2692×1640×2350
|
PYD900
|
Φ900
|
50
|
50
|
3-13
|
15-50
|
55
|
333
|
11.3
|
2692×1640×2350
|
PYB1200
|
Φ900
|
170
|
145
|
20-50
|
110-168
|
110
|
300
|
24.7
|
2790×1878×2844
|
PYZ1200
|
Φ900
|
115
|
100
|
8-25
|
42-135
|
110
|
300
|
25
|
2790×1878×2844
|
PYD1200
|
Φ1200
|
60
|
50
|
3-15
|
18-105
|
110
|
300
|
25.3
|
2790×1878×2844
|
PYB1750
|
Φ1750
|
250
|
215
|
25-50
|
280-480
|
160
|
245
|
50.3
|
3910×2894×3809
|
PYZ1750
|
Φ1750
|
215
|
185
|
10-30
|
115-320
|
160
|
245
|
50.3
|
3910×2894×3809
|
PYD1750
|
Φ1750
|
100
|
85
|
5-13
|
75-230
|
160
|
245
|
50.2
|
3910×2894×3809
|
PYB2200
|
Φ2200
|
350
|
300
|
30-60
|
59-1000
|
280/260
|
220
|
80
|
4622×3302×4470
|
PYZ2200
|
Φ2200
|
275
|
230
|
10-30
|
200-580
|
280/260
|
220
|
80
|
4622×3302×4470
|
PYD2200
|
Φ2200
|
130
|
110
|
5-15
|
120-340
|
280/260
|
220
|
81.4
|
4622×3302×4470
|
Note: The technical parameters above are just for your reference. If there is any change, all parameters and overall dimension are subject to operating instructions. Any questions please feel free to contact us.
- How to Extend Ball Mill Service Life
- Spanish miners block roads in pay protes
- Structure and Adjustment of Sand Making
- Crusher Machine Play a Role in High Spee
- Examination of Lubrication on Ball Mill
- Ball Mill Examination and Overhaul
- The development trend of Mining machiner
- Aluminum Ore Crushing
- Design Aspects of Ball Mill
- Cement Clinker Grinding Production
- raymond mill operating principle
- new ball mill
- High-reliability and energy-saving, the
- The trend of the steel's prices in the n
- Ball Mill for Sale - Henan YuHui
- High Pressure Grinding Mill Technical Ad
- Three ways to increase the capacity of b
- How to determine the quantity of steel b
- Vertical Mill
- coal mill